- OVERVIEW
- FEATURES
- COMPARISON
- SUPPORT
Overheat Protection
Overheat LED light will flash to warn the high temperature of the machine
"AUTO" function makes the machine to shred automatically when you feed paper and stop after finish shredding
Jam Protection System
The jam detection system automatically reverses paper. Free from frustration of paper jam
 |  |  |  |  |
|---|---|---|---|---|
| C275-A | C266-A | C267-B | C267-A | |
| Serial Name | EverShred | EverShred | EverShred | EverShred |
| Cut Type | Cross-Cut | Cross-Cut | Micro-Cut | Cross-Cut |
| Shred Ability | Credit Cards, Paper, Clips, Staples, Junkmail | CDs/DVDs, Credit Cards, Paper, Clips, Staples, Junkmail | CDs/DVDs, Credit Cards, Paper, Clips, Staples, Junkmail | CDs/DVDs, Credit Cards, Paper, Clips, Staples, Junkmail |
| Cut Size | 13/64 x 45/64 inches | 13/64 x 1-25/32 inches | 5/32 x 15/32 inches | 5/32 x 1-12/32 inches |
| Max Pages Per Load | 12 Pages | 12 Pages | 12 Pages | 15 Pages |
| Continuous Run Time | 10 Mins | 30 Mins | 30 Mins | 30 Mins |
| Cool Down Time | 40 Mins | 45 Mins | 20 Mins | 20 Mins |
| Noise Level | 70 dB | 70 dB | 65 dB | 65 dB |
| Basket Capacity | 5.5 gallons | 4.2 gallons | 5.3 gallons | 5.3 gallons |
| Basket Type | Lift-up | Pull-out | Pull-out | Pull-out |
| Product Dimensions | 15.75 x 12.8 x 7.68 inches | 18 x 13.15 x 9.6 inches | 20 x 14.5 x 10.4 inches | 20x14.44x10.94 inches |
When you notice the shredder is experiencing difficulty shredding, or gets jammed easily, then it's probably time to oil. If you use your shredder occasionally, then oiling your shredder may only be necessary every two months to maintain good performance. If you use your shredder a lot, however, then your best practices are to oil your shredder every time you empty the waste bin. Get your shredder lubricants by clicking here.
Fast Q&A:
Q: The cross-cut paper shredder is jammed. What should I do?
A: Please slide the switch to REV and pull up the paper, after removing the exceed sheets, please shred again. If there is too much paper scraps in the paper feed slot, sliding the switch to FWD mode for a few seconds and then to REV mode for a few seconds. Do this several times and the cutter will be cleaned.
Q: Why is this home office shredder not working?
A1: Please make sure you assemble the head and basket in correct directions first.The front of the shredder head should be aligned with the protruding side of the wastebin.
A2: The shredder machine enters overheating state. This paper shredder with 5 minute nonstop run time with 40 minute cool down after use. Please allow the shredder to cool for at least 40 mins , otherwise it will not work properly.
A3: Paper jams. You can need to press the forward and reverse gears for jam removal at this time.
Q: The shredder is broken, What should I do?
A: bonsaii shredder provides a one-year warranty service. Please feel free to contact our customer service, we will provide you with the best solution.
Q: Why is the number of sheets that can be shredded lower than the maximum number of sheets described?
A: Please check if the paper is damp, contains plastic or too thick. If so, please let the paper dry before shredding, or remove the plastic part.
CUSTOMER REVIEWS
You May Also Like
